Spring Maintenance Checklist for Your Liberty Trike
1. Charge Your Battery
- Plug in your charger, connect it to the battery, and allow it to charge fully.
- If you haven’t been maintenance-charging over the winter, this is particularly important.
- Let the battery charge for about two hours after it’s full to ensure a proper balancing charge.
2. Inspect the Rear Components
- Basket and Fenders: Check that the basket is securely attached and that any fenders are tightened properly.
- Rear Wheel Nuts: Ensure all nuts and bolts on the rear wheels are tight.
- Brake Check: Test the rear brake to ensure it’s functioning smoothly.
3. Clean and Lubricate the Chain
- Use dry lube or a 3-in-1 oil to clean and lubricate your chain.
- Check for rust or dirt buildup and clean the chain thoroughly if necessary.
4. Examine the Frame for Rust
- Look for any signs of rust on the frame.
- If rust is found, scrub it with steel wool and touch it up with nail polish or paint to prevent further damage.
5. Check the Hinge and Frame Connections
- Ensure the pins and quick-release mechanisms are secure.
- Double-check that the frame is properly assembled and locked together.
6. Adjust the Seat
- Test the quick-release clamp for the seat to ensure it’s tight and secure.
- Adjust the seat height and backrest (if applicable) to a comfortable position.
7. Inspect the Front Components
- Front Wheel: Check that both nuts are tight and the wheel is seated properly in the fork.
- Disc Brake: Test the front brake for alignment and functionality.
8. Align the Handlebars
- Ensure the handlebars are aligned with the front wheel and securely locked in place.
- Tighten the handlebar bolts if needed to prevent movement.
9. Test the Electrical System
- Check all electrical connectors from the back to the front:
- Battery Connection: Ensure the battery is securely connected to the controller.
- Motor Cable: Inspect the motor connector on the right side of the trike for a snug fit.
- Handlebar Controls: Confirm that all connectors for the throttle, e-brake, and LCD display are tight with no visible gaps.
10. Power On and Test Ride
- Power on your trike and test the throttle, brake, and pedal-assist levels.
- Start in a low assist level (0 or 1) to familiarize yourself with the controls again.
11. Practice Safe Riding
- If you haven’t ridden in a while, take a short test ride in a safe, open area to realign yourself with the trike’s handling.
Additional Safety Notes
- Battery Care: Always store your battery indoors and maintain at least an 80% charge if not in use for an extended period.
- Tire Pressure: Check and adjust tire pressure to the recommended PSI listed on the sidewall.
- Weather Awareness: Avoid using the trike in freezing temperatures, as this can affect battery efficiency.
If you need additional assistance, our team is here to help. Contact us at info@electricbiketech.com or call +1 888-220-6736.
Here’s to a safe and enjoyable spring riding season with your Liberty Trike!